Bar cart IKEA – It can often be a challenge to find unisex bar carts on the final market. So take matters into their own hands by making their own version of the DIY solid wood rolling bar cart with the help of pre-cut wood rounds, a drill press, hardware and stain. The results are one-of-a-kind and are suitable for the home, both boys and girls.
How to build a space saving bar cart IKEA, for this special set of rounds are the braces set to 19 inches apart. Mark all three points for braces on the edge of the first round, and then place the rounds on top of each other to mark the rest so you do not need to measure them separately (see below).Note that the middle layer will have staggered bracing investments as at the top, mark the holes was 19 inches and one inch in from the edge (as shown below). On the underside of the wood round, making brands were 9 and 1/2 inches and an inch in from the edge of the 19-inch marks so that the braces will falter correct. You do not need to worry about this on the underside of the top layer or on top of the lower level.
12 Photos Gallery of: Build A Space Saving Bar Cart IKEA
After that to build a space saving bar cart IKEA, mark the holes for the wheels, turn on the lower level up and down and put four wheels on the round. Checks that they are one-inch in from the edge and about the same distance from each other, although this need not be exact. You can eyeball it. Then mark through the holes in the wheels of the wood with a pencil. Set the wheels to the side when you’re done.